Operating Modes; Changing Modes Of Operation - Telex BP-2002 Operating Instructions Manual

Operation

Operating Modes

The microprocessor within the BP-1002/2002 controls four (4) modes of operation
that affect the Microphone Kill and Audible Call Alert features. These modes can be
seen in Table X on page X.

Changing Modes of Operation

Perform the following steps to change the mode of operation.
NOTE: Both the Talk and Call indicators should be off and the headset should
be connected.
Press and hold the Talk key, and then press and hold the Call key.
1.
Release both keys.
2.
The Call indicator glows red. (The number of beeps heard in the headset
indicates the current mode of operation.)
Press the Call key to change to the next mode of operation.
3.
Each press of the Call key causes the BP-1002/2002 to change the next mode
of operation.
When the desired mode is reached, press the Talk key to select that mode and
4.
exit the mode changing function.
Beeps are heard in the headset when the mode changing function is exited.
The number of beeps hears indicates the selected mode of operation.
NOTE: Each time the intercom system power is turned on, the beltpack
resets to the default mode of operation (mode 2).
Modes of Operation
TABLE 1.
Mode (beeps)
1
2 (default)
3
4
8
Mic Kill Audible Call Alert
Disabled
Enabled
Disabled
Enabled
Disabled
Disabled
Enabled
Enabled