Rdr_To_Pc_Parameters - ACS ACR33U-A1 Smart Duo Reference Manual

Offset
8
9
8.2.3.
This message is sent by ACR33U-A1 SmartDuo in response to PC_to_RDR_GetParameters,
PC_to_RDR_ResetParameters and PC_to_RDR_SetParameters messages.
Offset
0
1
5
6
7
8
9
10
ACR33U-A1 SmartDuo Reference Manual
Document Title Here
Document Title Here
Version 1.00
Field Size
bError
bClockStatus

RDR_to_PC_Parameters

Field Size
bMessageType
dwLength
bSlot
bSeq
bStatus
bError
bProtocolNum
abProtocolDat Byte
aStructure array
Value Description
Slot error register as defined in CCID
1
section 4.2.1
value =
00h Clock running
01h Clock stopped in state L
1
02h Clock stopped in state H
03h Clock stopped in an unknown state
All other values are RFU.
Value Description
1 82h
4 Size of extra bytes of this message
1 Same value as in Bulk-OUT message
1 Same value as in Bulk-OUT message
Slot status register as defined in CCID
1
section 4.2.1
Slot error register as defined in CCID
1
section 4.2.1
Specifies what protocol data structure
follows.
00h = Structure for protocol T=0
01h = Structure for protocol T=1
The following values are reserved for
1
future use.
80h = Structure for 2-wire protocol
81h = Structure for 3-wire protocol
82h = Structure for I2C protocol
Protocol Data Structure as summarized
in CCID section 10.1.6
Document Title Here
Page 19 of 56
info@acs.com.hk
www.acs.com.hk