Securing The Tumble Dryer Against Slippage; Payment System - Miele PT 5136 OS Operating And Installation Instructions

Installation and connection
,
A ventilation gap of 10 mm must
be maintained between the base of
the machine and the floor. It must
not be blocked by deep pile
carpets, plinths, etc, which would
prevent a sufficient intake of cold air.
This tumble dryer is not suitable for
building under.
Securing the tumble dryer against
slippage
,
Secure both front feet on the
dryer using the fixing brackets
supplied.
48

Payment system

The dryer can be fitted with a payment
system (optional accessory).
This must be connected and
programmed by a Miele Service
technician.
Coins/tokens must be removed from
the payment system regularly,
otherwise it will become blocked.
– Note for service technician:
,
When connecting to a payment
system, the plug connector on the
push button switch (see wiring
diagram) must be disconnected
from its position ex-works and
reconnected to the position for
payment system operation.
Failure to do this can cause the
payment system to malfunction.