Clock Functions - AEG BP5014321 User Manual

12 www.aeg.com
3. Open the oven door and put the
connector (B) into the outlet valve
(A).

6. CLOCK FUNCTIONS

6.1 Clock functions table
Clock function
Press
switch between the clock
functions.
To confirm the settings of
the clock functions, press
or wait 5 seconds for an
automatic confirmation.
A
B
C
Application
TIME OF DAY To set, change or check the time of day. Refer to "Set-
ting the time".
MINUTE MINDER Use to set a countdown time (maximum 23 h 59 min).
This function has no effect on the operation of the ap-
pliance. You can set the MINUTE MINDER at any time,
also if the appliance is off.
DURATION To set how long the appliance operates. Use only when
an oven function is set.
END To set when the appliance must deactivate. Use only
when an oven function is set. You can use Duration and
End at the same time (time delay), if the appliance is to
be activate and deactivate automatically later.
again and again to
4. Push the connector again and again
when you empty the water tank.
The water tank can have
some water when the
display shows
symbol. Wait until the
water flow from the
water outlet valve stops.
5. Remove the connector from the valve
when the water stops flowing.
Do not use the drained
water to fill the water tank
again.
6.2 Setting the DURATION or
END
1. Press again and again until the
display shows
or flashes in the display.
2. Press
or to the set the values
and press to confirm.
For Duration first you set the minutes
and then the hours, for End
set the hours and then the minutes.
or .
first you