Clock Setting - Kenwood k23cm13e Instruction Manual

clock setting

When the microwave is connected to the mains power, the LED display will show "0:00" and the
microwave will sound once. Please ensure that you have set the clock prior to use.
Please follow the steps below to set the clock.
1. Press the Clock/Kitchen Timer button and
the hour digits will flash.
2. Press the
/ buttons to adjust the hour
digits. The input time has to be within 0-23.
3. Press the Clock/Kitchen Timer button and
the minute digits will flash.
4. Press the
/ buttons to adjust the
minute digits. The input time has to be
within 0-59.
5. Press the Clock/Kitchen Timer button
again to complete the clock setting. ":" will
start flashing. The clock setting is complete.
• This is a 24-hour clock. When the
microwave is connected to the
mains power for the first time or
when the power is resumed after a
power interruption, the LED display
will show "0:00". To re-set the clock,
follow the above 5 steps.
• In the process of clock setting, if the
Stop button is pressed or if there
is no operation within 5 minutes,
the microwave will go back to the
previous status automatically.
• To find out the current time while
the microwave is operating, press
the Clock/Kitchen Timer button.
It will last for 2-3 seconds and then
return to its original display.
GB
1, 3, 5
2, 4
51