Setting Up Your Home; Before Use Theater System - Panasonic SC-ZT1 Operating Instructions Manual

Setting up your Home Theater system
Step
Installing the speakers
1
You can make your preferred setting because speaker
cords are not required.
• Make sure to place the speakers on a flat, stable surface so there is no
danger of them falling over.
• AC power supply cord (included) is necessary for each speaker.
Step
Connecting the television and DVD recorder
2
(Peripheral equipment and cables are not included unless otherwise mentioned.)
Install and connect the main unit and other equipment.
Connecting TV
Necessary cable:
(For images and audio)
(For audio)
Connecting recorder
Necessary cable:
(For images and audio)
• Only with HDMI cable connection, you cannot enjoy TV sounds on this system. Connect TV and the main unit
using the optical fiber cable (or stereo connection cable) to enjoy TV sound on this system.
• Connect with an HDMI cable for high-quality audio and video.
• This connection requires HDMI terminals on both the television and the DVD recorder.
Step
Setting the speakers
3
Use the remote control for speaker setting.
• Make sure to make the speaker setting when using for the first time after
purchase.
Step
Enjoying movies and music
4
Enjoy surround sound with DVDs, TV, and other
sources.
• Audio is transmitted wirelessly.
4
RQT9471
HDMI cable: 1 (not included)
Optical fi ber cable: 1 (not included)
HDMI cable: 1 (not included)
(➜ page 8)
(➜ page 13)
(➜ page 16)
(➜ page 9)
I need 2 HDMI
cables and 1
optical fi ber cable
for connections.