Preparing For The Remote Control - Hitachi CP-WU8460 User Manual

Preparing for the remote control

Please insert the batteries into the remote control before using it. If the remote
control starts to malfunction, try to replace the batteries. If you will not use the
remote control for long period, remove the batteries from the remote control and
store them in a safe place.
1. Holding the hook part of the battery
cover, remove it.
Align and insert the two AA batteries
2.
(HITACHI MAXELL ENERGY, Part
No.LR6 or R6P) according to their plus
and minus terminals as indicated in the
remote control.
Replace the battery cover in the direction of the arrow
3.
and snap it back into place.
WARNING
directed. Improper use may result in battery explosion, cracking or leakage,
When replacing the batteries, replace both of the batteries with new batteries
of the same type. Do not use a new battery with a used battery.
types at the same time. Do not mix a new battery with used one.
Make sure the plus and minus terminals are correctly aligned when loading a battery.
Do not recharge, short circuit, solder or disassemble a battery.
If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
Obey the local laws on disposing the battery.
Always handle the batteries with care and use them only as
1
2
3
5