Entries And Graphical Symbols Explanation; Important Safety Instruction - Hitachi CP-WU8460 User Manual

First of all

Entries and graphical symbols explanation

The following entries and graphical symbols are used for the manuals and the product
as follows, for safety purpose. Please know their meanings beforehand, and heed them.
WARNING This entry warns of a risk of serious personal injury or even death.
CAUTION This entry warns of a risk of personal injury or physical damage.
NOTICE This entry notices of fear of causing trouble.

Important safety instruction

follow them always when handling the product. The manufacturer assumes no
responsibility for any damage caused by mishandling that is beyond normal usage
WARNING
off smoke, smelling strange, took a liquid or an object inside, broken, etc.) If an
abnormality should occur, unplug the projector urgently.
Situate the product away from children and pets.
physician immediately for emergency treatment.
Do not use the product when there is fear of a thunderbolt.
Unplug the projector from the power outlet if the projector is not used for the
time being.
Do not connect the projector to a power supply while no lens unit is attached to it.
Do not open or remove any portion of the product, unless the manuals direct
Do not modify the projector or accessories.
Do not let any things or any liquids enter to the inside of the product.
Do not wet the product.
Do not place the projector where any oils, such as cooking or machine oil, are used.
Oil may harm the product, resulting in malfunction, or falling from the mounted position.
Do not apply a shock or pressure to this product.
- Do not place the product on an unstable place such as the uneven surface or
the leaned table.
- Do not place the product unstably. Place the projector so that it does not
protrude from the surface where the projector is placed on.
- Place your hands on the grip on the bottom of the projector when carrying the
projector.
- Remove all the attachments including the power cord and cables, from the
projector when carrying the projector.
Do not look into the lens and the openings on the projector, while the lamp is on.
Do not approach the lamp cover and the exhaust vents, while the projection lamp
is on. Also after the lamp goes out, do not approach them for a while, since too hot.
2
Never use the product in or after an abnormality (ex. giving