Setting The Clock; Setting The Clock Through "Lg Bluetooth Remote" App; Using Your Player As An Alarm Clock; Sleep Timer Setting - LG CMS4340F Owner's Manual

22 Operating

Setting the Clock

1. Turn the unit on.
2. Press and hold CLOCK.
3. Select time mode by pressing C/V on
the remote control.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press SET to confirm your selection.
5. Select the hours by pressing C/V on the
remote control.
6. Press SET.
7. Select the minutes by pressing C/V on
3
the remote control.
8. Press SET.
Setting the Clock through
"LG Bluetooth Remote" App
Install "LG Bluetooth Remote" app on your Android
device. (see page 27 - 29)
Your unit's clock will be automatically synchronized
with your device by activating Bluetooth
connection through "LG Bluetooth Remote" app.
Using your player as an alarm
clock
1. Turn the unit on.
2. Press and hold ALARM.
3. Press C/V on the remote control to
change the hours and minutes and press SET to
save.
4. Press C/V on the remote control to
select function and press SET to save.
5. Press C/V on the remote control to
change the volume and press SET to save. The
clock icon "(" shows that the alarm
CM4340P-FV.DAUSLLK_ENG_0125.indd 22
,
Note
y If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned off.
y If you set the clock time and alarm, you
can check the alarm icon "(" by pressing
CLOCK even when the player is turned off.
y If you set the clock time and alarm, you
can check the alarm icon "(" and setting
informaiton by pressing ALARM even when
the unit is turned off.
y Press ALARM, you can selects a ALARM
on / off mode.

Sleep Timer Setting

Press SLEEP repeatedly to select delay time
between 10 and 180 minutes. After the delay time,
the unit will be turned off.
To cancel the sleep function, press SLEEP
repeatedly until "SLEEP 10" appears, and then press
SLEEP once again while "SLEEP 10" is displayed.
,
Note
y You can check the remaining time before
the unit is turned off.
y Press SLEEP. The remaining time appears in
the display window.

Dimmer

Press SLEEP once. The display window will
be darkened by half. To cancel it, press SLEEP
repeatedly until dim off.

Auto power down

This unit will turn off itself to save electric
consumption in the case were main unit is not
connected to external device and is not used for 20
minutes.
So does this unit after six hours since Main unit has
been connected to other device using analogue
input.
2014-03-07 1:37:53