Please check the copyright laws in your country to
record from records, compact discs, radio, etc.
Recording of copyright material may infringe
This unit allows you to make recordings from a wide
variety of program sources (both analog and digital).
When recording an analog source (such as an FM
broadcast or cassette) this unit converts the analog signals
to a 44.1 kHz digital signal before recording them onto
When recording a digital source, this unit converts the
digital signals to 44.1 kHz for recording onto the MD.
However, if you are recording a 44.1 kHz source signal
(such as a CD) there is no conversion. This unit can
record 32, 44.1 and 48 kHz digital signals.
• Press STANDBY/ON (POWER on the remote control)
to turn this unit on.
A B C
D E F
M N O
P Q R
M-MARK REC MODE INPUT
G H I
J K L
S T U
V W X
Insert an MD.
Arrow pointed toward
disc insertion slot
Press INPUT repeatedly to select the input you want
ANALOG IN Î
DIGITAL OPTICAL 1 IN
DIGITAL OPTICAL 2 IN
A-B S F
(Source) sampling frequency indicators*
* Appears when digital signal is input.
If desired, press REC MODE to select the recording
mode (see "Setting the recording mode" on page 15).
Locate the point where you want to start recording.
When recording on a blank MD
• Skip this step.
To start recording from the end of a previous
• Press & to set this unit to stop mode.
To record over a previous recording
• Turn the jog dial (or press $ or › on the remote
control) to select a track (recording starts from the
beginning of the deleted track).
Start playing the source to be recorded.
• If you do not need to adjust the recording level,
this step is not necessary.
Press REC/PAUSE to set this unit to record pause
• The REC * indicators light up.
"REC Standby" and the amount of time available
for recording flash alternately in the display.
If you selected a track number (in step 4) to
record over a previous recording
• "OverWrite OK?" appears in the display.
To confirm, press SET/ENTER. This operation will
erase the selected track number (or point) and all
To cancel, press DELETE/CANCEL (or &).
Label facing up
DIGITAL OPT. 1
DIGITAL OPT. 2
4 2 1 0 OVER