Yamaha Clavinova CVP-709 Reference Manual page 93

2
Touch [R] to call up the other page then select which MIDI messages are to be transmitted
for each Part.
The following MIDI messages can be set on the Transmit/Receive display.
Note (Note events)
•
CC (Control Change)
•
PC (Program Change)
•
PB (Pitch Bend)
•
AT (Aftertouch)
•
Receive – MIDI Receive Channel Settings
The explanations here apply when you call up the "Receive" display in step 2 on
used for each MIDI channel when the MIDI data is recognized by this instrument.
1
For each Channel, select the Part which is to handle the MIDI data of the corresponding
channel received from the external MIDI device.
When connecting via USB, MIDI data of 32 channels (16 channels x 2 Ports) can be handled by this instrument.
With the exception of the two parts below, the configuration of the parts is the same as those already explained
elsewhere in the Owner's Manual.
Keyboard:
• The received note messages control the instrument's keyboard performance.
Extra Part 1 – 5:
•
parts are not used by the instrument itself.
2
Touch [R] to call up the other page then select which MIDI messages are to be received for
each Channel.
CVP-709/CVP-705 Reference Manual
............................ page 69
....................... page 69
..................... page 69
................................. page 69
................................. page 69
1
The dots corresponding to each channel (1–16) flash briefly whenever any
data is received on the channel(s).
These five parts are specially reserved for receiving and playing MIDI data. Normally, these
Lets you alternate between two pages.
page 90. This determines which Part is
2
MIDI Settings
93