Yamaha Clavinova CVP-709 Reference Manual page 63

Recording Melodies via Step Recording
The explanations here apply when one of "Ch1" – "Ch16" is selected in step 5 on
the bottom left of the display, you can input the notes one by one, using the controls below.
1
 Control Names and Functions
Event List
1
Song Position
2
(Measure: Beat:
Clock)
Cursor
3
Step Rec
4
Velocity
5
Length
6
CVP-709/CVP-705 Reference Manual
4 5 6
Indicates events such as note and Voice selection which have been input. For details,
refer to page 69.
Indicates the current Song position. Events such as note and Voice selection you have
input are recorded at the position indicated here. You can change the current position
by touching [U] or [D] below the Measure, Beat, and Clock* respectively.
*Clock
Smallest unit for the Song position and note length. A quarter note consists of 1920 clocks.
Lets you move the cursor position.
Turning this on shows the Step Recording display, and turning it off shows the Song
Edit display.
Determines the velocity (loudness) of the note to be entered. The velocity value can be
specified within a range from 1 to 127. The higher the velocity value, the louder the
sound becomes.
Kbd.Vel: Actual resulting velocity
127
111
95
79
Determines the gate time (note length) of the note to be entered.
Normal:
80%
Tenuto:
99%
Manual: For freely setting the gate time. Touch "Manual" and close the pop-up window by touching
"OK," then set the gate time to any desired percentage by using the Data dial.
Creating/Editing MIDI Songs (Song Creator)
page
7
63
47
31
15
Staccato:
40%
Staccatissimo:
20%
62. With [Step Rec] turned on at
2
3
8
63