Yamaha Clavinova CVP-709 Reference Manual page 14

4
Touch (Save), then save the settings as a User Effect type.
Up to 3 Effect types can be stored for each of the Reverb, Chorus and Variation Effect Blocks while up to 10 Effect
types can be stored for the Insertion Effect Blocks.
NOTICE
The settings will be lost if you turn the power to the instrument off without executing the Save operation.
NOTE
If you want to save the Effect settings to a USB flash drive, save as a User Effect file. To do this, from the display called up
via [Menu]  [Utility]  [Factory Reset/Backup]  page 2/2, touch [Backup] of "User Effect" to execute the Save
operation (page
Chorus/Reverb
As described in the previous section, Chorus and Reverb are System Effects which are applied to the entire sound of the
instrument. They are not available when the "Master" tab is selected at the top of the mixer display.
Chorus Touch the Chorus type name at the top right of this row to select the desired Chorus type. After
selecting, return to the Mixer display then use each knob to adjust the Chorus depth for each part.
Reverb Touch the Reverb type name at the top right of this row to select the desired Reverb type. After
selecting, return to the Mixer display then use each knob to adjust the Reverb depth for each part.
When VRM Voices are selected, "VRM" indications appear under the knobs of the parts. If VRM Voices are selected for
multiple parts, the Chorus depth and the Reverb depth are applied commonly to all these parts.
NOTE
For details about the Chorus and Reverb types, refer to the Data List (Effect Type List).
Editing and Saving the Chorus/Reverb settings
Same as the operation on the "Effect" display
CVP-709/CVP-705 Reference Manual
99).
(page 13).
Editing the Volume and Tonal Balance (Mixer)
14