Maintain And Sharpen Diamond Abrasive Chain - Stihl GS 461 Instruction Manual

English
Installing the clutch drum
Clean crankshaft stub and needle
N
cage and lubricate with STIHL
lubricant (special accessory)
Slip the needle cage onto the
N
crankshaft stub.
Fit clutch drum
N
Fit rim sprocket
N
Refit washer and E-clip on the
N
crankshaft
Fit cap
N
26
Maintain and sharpen
diamond abrasive chain
Maintaining the diamond abrasive chain
After finishing work:
Remove diamond abrasive chain
N
and guide bar
Rinse diamond abrasive chain and
N
guide bar with water
Dry diamond abrasive chain and
N
guide bar
Spray diamond abrasive chain and
N
guide bar with STIHL multispray – in
particular the bearing of the
sprocket nose – corrosion
protection
Check diamond abrasive chain regularly
Check the diamond abrasive chain
N
for cracks and damaged rivets
Replace damaged or worn chain
N
components – contact a servicing
dealer
Never use a dull or damaged diamond
abrasive chain – this leads to increased
physical strain, increased vibration load,
unsatisfactory results and increased
wear.
If cutting performance begins to
deteriorate, check the sharpness of the
diamond abrasive chain, resharpen as
needed. To do this, briefly cut through
abrasive material, e. g., sandstone,
aerated concrete or asphalt.
GS 461