Stihl GS 461 Instruction Manual page 19

Connect concrete cutter to water supply
network
Connect concrete cutter to water
N
supply network (min. 1.5 bar)
Before starting, open shut-off valve
N
(arrow) completely
Hold concrete cutter
There are two ways to hold the concrete
cutter during starting.
GS 461
On the ground
Place the concrete cutter securely
N
on the ground – assume a steady
stance- the diamond abrasive chain
must not touch any objects or the
ground
Press the concrete cutter firmly
N
against the ground, holding the front
handle with your left hand, thumb
wrapped round the handle
Place your right foot into the rear
N
handle
Between the knees or thighs
Clamp the rear handle between the
N
knees or thighs
Grip the handlebar firmly with the
N
left hand – thumb wrapped around
the handlebar
English
17