Panasonic WV-CL924A Operating Instructions Manual page 26

5. Electronic Sensitivity Enhancement
(SENS UP)
There are two modes for SENS UP.
AUTO: If you select x32 AUTO, for example, the
sensitivity is raised automatically to x32 max.
When AUTO is selected, AGC is automatically
set to ON.
FIX: If you select x64 FIX, for example, the sensitiv-
ity is raised to just x64.
** CAM SET UP **
CAMERA ID
ALC/ELC
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
LENS DRIVE
END SET UP ENABLE
Move the cursor to the SENS UP parameter and select
the parameter for electronic sensitivity enhancement.
The preset values for SENS UP (electronic sensitivity
enhancement) change by pressing
lows:
OFF X2 AUTO X4 AUTO
X64 FIX X32 FIX X16 FIX
OFF
ALC
OFF
ON (DNR-H)
OFF
INT
ATW1
OFF
DC
or
X6 AUTO X10 AUTO X16 AUTO
X10 FIX X6 FIX X4 FIX X2 FIX
Notes:
• While the SENS UP function is selected, noise,
spots or a whitish phenomenon may appear in the
picture when the sensitivity of the camera is
increased. This is a normal phenomenon.
• x64FIX does not appear for the SENS UP parame-
ter on the system controller setup menu.
• In case of using the WV-CU204 or WV-CU254
Controller, status does not appear correctly for the
SENS UP parameter on the setup menu.
as fol-
X32 AUTO
OFF
-27-