Panasonic WV-CL924A Operating Instructions Manual page 24

2. Move the cursor to MASK SET and press
The 48 mask areas appear on the monitor screen.
The cursor is blinking in the top left corner of the
screen.
Blinking
3. Move the cursor to the area where backlight is
bright, and press
turns white. (When the cursor is moved on an area
that has already been masked, the mask and cur-
sor start blinking.)
Blinking
.
to mask that area. The mask
4. Repeat step 3 to mask the desired area. To cancel
masking, move the cursor to that area and press
.
Turns to white
Blinking
5. After masking is completed, press
onds or more. The ALC CONT menu appears.
6. If you want to change the video output level (pic-
ture contrast), move the "I" cursor LEVEL and
adjust the level.
7. Move the cursor to RET and press
the CAM SET UP menu. (To return to the camera
picture, move the cursor to END and press
Caution: When an auto iris lens requiring a DC
control signal is used, the lens iris is fully
opened in ELC mode.
-25-
for 2 sec-
to return to
).