Panasonic WV-CL924A Operating Instructions Manual page 21

2. Move the pointer to the character to be replaced
by pressing or
the character area and select a new character.
3. Press to determine the CAMERA ID.
To erase all characters in the editing area
Move the cursor to RESET and press
ters in the editing area disappear.
To determine the display position of the CAMERA ID
1. Move the cursor to POSI, and press
play shown below appears and the CAMERA ID is
highlighted.
Highlighted
WV-CL920
2. Move the CAMERA ID to the desired position by
pressing / /
. Then move the cursor to
. All charac-
. The dis-
/ .
3. Press to fix the position of the CAMERA ID.
The mode returns to the previous CAMERA ID
menu.
Notes:
• The CAMERA ID stops at the edges of the
monitor screen.
• The CAMERA ID moves faster if any of
/ /
more.
2. Light Control Setting (ALC/ELC)
You can select the mode for adjusting the lens iris.
The modes are as follows:
ALC: Select this mode when an auto iris lens (ALC
lens) is used with this camera.
ELC: Select this mode when a fixed iris lens or manual
iris lens is used with this camera.
CAMERA ID
ALC/ELC
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
LENS DRIVE
END
-22-
is kept pressed for a second or
** CAM SET UP **
OFF
ALC
OFF
ON (DNR-H)
OFF
INT
ATW1
OFF
DC
SET UP ENABLE
/