Panasonic WV-CL924A Operating Instructions Manual page 25

3. Shutter Speed Setting (SHUTTER)
Note: When ELC is selected for ALC/ELC on the CAM
SET UP menu, this item is not available.
You can select an electronic shutter speed of 1/60
(OFF), 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, or
1/10 000 seconds.
** CAM SET UP **
CAMERA ID
ALC/ELC
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
LENS DRIVE
END SET UP ENABLE
Move the cursor to the SHUTTER parameter and select
the electronic shutter speed.
The preset values for SHUTTER (electronic shutter
speed) change by pressing
OFF (1/60) 1/100
1/10 000 1/4 000
OFF
ALC
OFF
ON (DNR-H)
OFF
INT
ATW1
OFF
DC
or as follows:
1/250 1/500
1/2 000 1/1 000
4. Gain Control Setting (AGC ON/OFF)
You can set the gain (brightness level portion of an
image) to automatic level adjustment ON (DNR-H), ON
(DNR-L) or fixed level (OFF).
** CAM SET UP **
CAMERA ID
ALC/ELC
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
LENS DRIVE
END
Move the cursor to the AGC parameter and select auto-
matic level adjustment ON (DNR-H), ON (DNR-L) or
fixed level (OFF).
Notes:
• If ON (DNR-H) is selected for the AGC parameter,
the noise reduction function is automatically acti-
vated under low light conditions to reduce noise. In
pictures containing a moving object, this may result
in an afterimage.
• DNR-L is recommended for pictures containing a
moving object that results in an afterimage.
However, the noise slightly increases.
• DNR-H and DNR-L do not appear for the AGC
parameter on the system controller setup menu.
-26-
OFF
ALC
OFF
ON (DNR-H)
OFF
INT
ATW1
OFF
DC
SET UP ENABLE