General Operation - Sanyo CP28WF1 Instruction Manual

General Operation

Power ON/OFF(Stand by)
Press the Power ON/OFF button to turn on
or off (Stand-by) the TV set.
Lighting of the Stand-by and Power Indicator shows
that there is a power supply. For shutting off a
power supply completely, disconnect the power
cord from the power outlet.
You can turn on the TV in the standby mode by
pressing the following button in addition to the
Power ON/OFF button.
Programme Up/Down button of the remote
control transmitter or the TV set.
1 to 9, 0 button on the remote control transmitter.
Auto Shut Off Function
This TV set changes to the standby mode within
10 minutes after all broadcasts have ended.
Direct Programme Selection
Example:
Press 6 button to select programme position 6.
To select programme position 27, press the
Digit button, press 0, 2 then 7 button.
To select programme position 215, press the
DIGIT button, press 2, 1 then 5 button.
Programme Up and Down
To select the next or previous programme
position.
Volume Control
To increase or decrease the sound
volume Level.
TV/AV Selector
Press repeatedly to switch to TV, AV1, AV2
or DVD/AV3 (VIDEO) mode.
6
6
Sound Mute
Should you wish to mute the sound, (e.g.
While talking on the telephone) press the
Sound Mute button. To switch the sound
back on, press this button again (or press
the Volume + or - button).
Alternate
Press the Alternate button, and the pro-
gramme position will alternately select the
previous position and the present position.
Bass Expander On/Off
Press the BASS button to get an
emphasised bass sound.
Picture Mode Selection
Press the Picture Mode button repeat-
edly to select the following picture
modes;
PERSONAL : Your personal preference mode.
DYNAMIC: Suitable for brightly lit room.
NATURAL: Normal viewing mode.
ECO: Suitable for dimly lit room and gives a
cinema-like effect.
GAME:
Picture mode that is gantle on the eyes,
suitable for TV game.
Active 3D Surround
This TV provides
3 Dimensional Surround sound effect.
Press the SURROUND button to select the fol-
lowing modes.
SURROUND OFF:
To cut off 3D surround effect.
SURROUND 1:
Gives the middle 3D surround effect.
SURROUND 2:
Gives the deep 3D surround effect.
Programme Information Call
To display the on screen indication, press
the Recall/Colour System button.
Sound
NICAM
Status
OFF 5
Off-timer
an incredible
Programme Position
Colour
3
System
AUTO
Sound
BG
System