Table of Contents
Advertisement
file:///C|/Documents and Settings/eDOK/
6.1.3 Handling of optical pickup
TOP PREVIOUS NEXT
1. To keep the good quality of the optical pickup maintenance parts during transportation and before
installation, the both ends of the laser diode are short-circuited. After replacing the parts with
new ones, remove the short circuit accordingtothe correct procedure. (See this Technical Guide.)
2. Do not use a tester to check the laser diode for the optical pickup. Failure to do so will damage
the laser diode due to the power supply in the tester.
TOP PREVIOUS NEXT
file:///C|/Documents and Settings/eDOK/
Рабочий
стол
/DVD-S35xx/s0601030000.html
Рабочий
стол
/DVD-S35xx/s0601030000.html03.10.2007 22:44:44
Advertisement
Table of Contents
