Sony XR-C340 Service Manual page 13

LEVER (LDG-A) / (LDG-B)
shaft A
shaft B
1 Fit the lever (LDG-A) on
shafts A – C and install it.
GEAR (LDG-FT)
gear (LDG-D)
hole
hole
gear (LDG-FB)
3 Align hole in the gear (LDG-D)
with hole in the lever (LDG-A).
shaft C
4 gear (LDG-FT)
lever (LDG-A)
shaft A
4 type-E stop ring 2.0
5 polyethylene washer
2 Move the lever (LDG-B)
in the arrow direction.
– 13 –
2 Pull the lever in the
arrow direction.
shaft B
3 Fit the lever (LDG-B) on
shafts A and B and
install it.
1 tension spring (lever LDG)