Confirming Sensor Logs; Restarting The Camera - Panasonic BL-C20 Operating Instructions Manual

6.1.4

Confirming Sensor Logs

Displays up to 50 Sensor Logs in chronological order. Old logs will be overwritten
by new ones.
1.
Click [Sensor Log] on the Maintenance page.
2.
Sensor Logs are displayed.
Note
If the camera is restarted, all sensor logs are deleted.
Item
New Sensor Logs
Date
Sensor Type
6.1.5

Restarting the Camera

It is possible to restart the camera by disconnecting the AC adaptor from the power
outlet and reconnecting it again. The camera can also be restarted on the Restart
page.
Note
When the camera is restarted, the buffered images and sensor logs will be
deleted.
1.
Click [Restart] on the Maintenance page.
2.
Click [Restart].
• Restarting takes about 90 seconds. The Top page is displayed when
finished.
• Displays the number of new sensor logs.
• Displays the date and time when the Motion Detection is
activated.
• Displays the Trigger Setting (Motion Detection) on the
Trigger page.
Description
Operating Instructions
113