Panasonic BL-C20 Operating Instructions Manual page 105

Setting
Banner Display
• Banner user
• Image URL
*1
• Link URL
*1
Note that [Space], ["], ['], [&], [<], and [>] are not available.
*1
3.
Click [Save] when finished.
• The new settings are saved.
• When finished, "Success!" is displayed.
4.
Click [Go to Image Display page].
• The Image Display page is displayed.
When checked to [Enable], the setting will be enabled.
When unchecked, the setting will be disabled.
Note
• When the Banner Display is enabled, the camera
accesses the Image URL every time the Single
Camera page is displayed. The intermittent and
continuous switching of the Single page burdens
the PC that stores the image linked with the URL.
• If the image URL linked with an image stored in a
PC that requires an authentication is set, the
authentication window will be displayed when
displaying the Single page.
• All users
Administrator only : The banner can be displayed for
General user only : The banner can be displayed for
• Enter the image URL you want to display as a banner.
When [Enable] is checked, enter the image URL. (1—
127 characters)
• Enter the target URL you want to display when clicking
the banner. (0—127 characters)
Description
: The banner can be displayed for
all users.
the administrator only.
the general users only.
Operating Instructions
105