Konica Minolta bizhub C450 User Manual page 324

Various Settings
Item
TCP/IP
Network Speed
IP Address Setting Method
IP Address
Subnet Mask
Default Gateway
Port 1
Port 2
Port 3
Port 4
Port 5
Port 6
Dynamic DNS Setting
Host Name
DNS Domain Name Setting
DNS Server Setting
SLP Setting
LPD Setting
Note
To apply any changes to settings for the Network tab, restart this ma-
chine (turn the main power off, then on again).
When turning the power off, then on again, be sure to turn the sub-power
switch off first, then the main power switch. In addition, wait at least 10
seconds before turning the power on again; otherwise, this machine may
not function properly.
C450
Description
Specify whether to enable TCP/IP.
Select the operation speed.
Select when using a DHCP server.
Specify the IP address of this machine (format: "***.***.***.***",
input range for ***: 0—255).
Specify the subnet mask connecting to a network (format:
"***.***.***.***", input range for ***: 0—255).
Specify the default gateway address connecting to a network
(format: "***.***.***.***", input range for ***: 0—255).
Specify the RAW port number (input range: 1—65535).
Specify whether to enable DNS.
Specify the host name (up to 63 characters).
Specify the domain name (up to 254 characters including the
characters for the host name).
Register a maximum of three DNS servers (format: "***.***.***.***",
input range for ***: 0—255).
Specify whether to enable SLP.
Specify whether to enable LPD.
10
10-91