Getting Started - Kuchef KE-7096 Instruction Manual

Getting Started

Before first use
• Unpack the appliance but keep all packaging materials until you have made
sure your new kettle is undamaged and in good working order. Plastic
wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging materials are out of their reach.
• Unwind the cord to its full length and inspect it for damage. Do not use the
appliance if the appliance or its cord have been damaged or are not working
properly. In case of damage, contact our after sales support line for advice
on examination, repair or return of the damaged product.
• Read this manual to familiarise yourself with the kettle. Pay particular
attention to the safety instructions on the previous pages.
• Make sure the appliance is disconnected from the power supply and the on/
off switch is in the OFF position (up).
• Lift the kettle vertically off the power base, open the lid and fill the kettle
with cold water and boil it (as described on the following page), then discard
the water. This is to ensure all oils, dust and other residues left from the
manufacturing process and transport are removed. Repeat this procedure
before using the kettle for boiling water to drink.
• Your new kettle is now ready for use.
Boil-dry protection
The kettle has an automatic shut-off feature that shuts down power to the kettle
if it is empty, preventing accidental operation without water. Once this safety
feature has been activated, unplug the kettle and let it cool down for a few
minutes before filling it with cold water.
AFTER SALES SUPPORT
AUS 1300 886 649
info@tempo.org
MODEL: KE-7096 PRODUCT CODE: 39433 08/2014
7