Kuchef KE-7096 Instruction Manual page 11

Instructions (Cont.)
5. The kettle will automatically switch off when the water has boiled: the on/off
switch will return to the OFF position and the power indicator will no longer
be illuminated.
6. Wait until the water inside the kettle has completely stopped bubbling before
pouring. Holding it by the handle, carefully lift the kettle off the power base.
Take care when pouring the water to avoid scalding from boiling water
or hot steam. Do not open the lid while the water in the kettle is hot.
7. To stop the heating process at any time during operation, press the on/off
switch upwards.
8. To re-boil the water, allow the kettle to cool for 15~20 seconds before
pushing down the switch again to boil the water.
9. The kettle may be stored on the power base but make sure the power supply
is turned off when the kettle is not in use.
NOTE:
• The kettle takes 15–20 seconds to turn off when boiling – this is not a fault.
• Should you accidentally allow the kettle to operate without water, the boil-
dry protection will automatically switch it off. If this should occur, allow the
kettle to cool before filling with cold water and re-boiling.
AFTER SALES SUPPORT
AUS 1300 886 649
CAUTION!
MODEL: KE-7096 PRODUCT CODE: 39433 08/2014
info@tempo.org
9