Instructions - Kuchef KE-7096 Instruction Manual

Instructions

Using the kettle
1. To fill the kettle, remove it from the power base and open the lid (Fig. 1). Fill
with the desired amount of cold tap water, then close the lid.
2. Make sure to fill the kettle at least to the minimum (0.5L) but not beyond
the maximum (1.7L) level. Too little water will result in the kettle switching
off before the water has boiled; too much water will result in boiling water
spilling out of the spout when boiling. Take care that no water spills onto the
power base.
3. Ensure that the lid is firmly in place before positioning the kettle on the power
base. With dry hands, plug the power base into an appropriate wall outlet
and switch on power at the outlet.
4. Press down the on/off switch below the handle (Fig. 2). The indicator light will
light up and the water will start heating up. Do not open the lid during use.
NOTE: Ensure that the switch is free of obstructions and the lid is firmly closed.
The kettle will not turn off if the switch is constrained or the lid is open.
AFTER SALES SUPPORT
8
Fig.1
Fig.2
AUS 1300 886 649
info@tempo.org
MODEL: KE-7096 PRODUCT CODE: 39433 08/2014