Page 2
KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS BLOWER 1. ASSEMBLY 1 Direction Nozzle 5 Upper Handle 2 Blow Tube 6 Battery Attaching the blow tube and direction nozzle 3 Blow Tube Release Tab 7 Battery Release Tab 4 ON/OFF Switch/ 8 Lower Handle CAUTION! ENSURE THE TOOL IS OFF &...
Page 3
2. BATTERY & CHARGING Battery Charge Indicator CAUTION: THE POWER SUPPLY FOR THIS CHARGER The blower battery is equipped with a SHOULD BE PROTECTED BY A RESIDUAL CURRENT battery charge indicator to show the DEVICE (RATED AT 30MA OR LESS). state of the battery charge.
Page 4
OPERATION 3. ADJUSTABLE SPEED SWITCH 4. OPERATING THE BLOWER Turning ON WARNING! DO NOT USE THE BLOWER WITH ANY To turn the blower on, move the ON/OFF TYPE OF ACCESSORY OR ATTACHMENT. SUCH USAGE switch/adjustable speed dial forward. MIGHT BE HAZARDOUS. WARNING! DO NOT PUT PART OF YOUR BODY SUCH AS HANDS AND FINGERS IN THE VACUUM OPENING...
Page 5
No lubrication is necessary as the motor is equipped with lifetime- lubricated bearings. Note: Ozito Industries will not be responsible for any damage or injuries Wear ear muffs. caused by repair of the tool by an unauthorised person or mishandling or mistreatment of the tool.
Page 6
Tool: SPARE PARTS Model No. The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No. Description Part No. Battery Pack ACCLB-136 Charger ACCLC-036 How To Order Available spare parts can be ordered through the Special Orders Desk at any Bunnings Warehouse.
Page 7
ELECTRICAL SAFETY WARNING! If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid When using mains-powered tools, basic safety precautions, including the a hazard. following, should always be followed to reduce risk of fire, electric shock, personal injury and material damage.
Page 8
• Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. OZITO 0414 Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
Need help?
Do you have a question about the BLL-036 and is the answer not in the manual?
Questions and answers