Menu Operation Guide; Returning A Setting To The Factory Default - Panasonic PT-LC56E Operating Instructions Manual

Menu operation guide

# Press the MENU button.
The MAIN MENU
POWER
INPUT
screen will be
VIDEO RGB
displayed.
AUTO
MENU
SETUP
ENTER
FREEZE SHUTTER
STD
VOLUME D.ZOOM
INDEX
WINDOW
$ Press the F F or G G arrow buttons to select an
item.
PROJECTOR
Selected items
will be displayed
Menu operation
in blue.
(on connector panel)
% Press the ENTER button to accept the
selection.
The selected
menu screen or
adjustment
screen will then
be displayed.
(Example:
PICTURE
NOTE:
menu)
B If you press the
MENU button while
a menu screen is
being displayed,
the display will
return to the
previous screen.
32-E
NGLISH
M E N U
K E Y S T O N E
P I C T U R E
P O S I T I O N
I N D E X W I N D O W
S H U T T E R
V O L U M E
L A N G U A G E
O P T I O N 1
O P T I O N 2
S E C U R I T Y
S E L E C T E N T E R E X I T
M E N U
K E Y S T O N E
P I C T U R E
P O S I T I O N
I N D E X W I N D O W
S H U T T E R
V O L U M E
L A N G U A G E
O P T I O N 1
O P T I O N 2
S E C U R I T Y
S E L E C T E N T E R E X I T
P I C T U R E
P I C T U R E M O D E S T A N D A R D
C O N T R A S T 3 2
B R I G H T 3 2
C O L O R 3 2
T I N T 3 2
S H A R P N E S S 8
C O L O R T E M P . S T A N D A R D
T V - S Y S T E M A U T O 1
S T I L L M O D E O F F
S T A N D A R D
S E L E C T A D J R E T R N
& Press the F F or G G buttons to
select an item, and then press the
I I or H H buttons to change or
adjust the setting.
An individual adjustment screen
such as the one shown below will
be displayed for bar-scale items.
B R I G H T 3 2
The bar scale will turn green when
any adjustment changes the setting
from the factory set value.

Returning a setting to the factory default

If you press the STD (standard) button on the remote control unit, you can
return settings to the factory default settings. However, the operation of this
function varies depending on which screen is being displayed.
B When a menu screen is being
displayed
P I C T U R E S T D
P I C T U R E M O D E S T A N D A R D
C O N T R A S T 3 2
B R I G H T 3 2
C O L O R 3 2
T I N T 3 2
S H A R P N E S S 8
C O L O R T E M P . S T A N D A R D
T V - S Y S T E M A U T O 1
S T I L L M O D E O F F
S T A N D A R D
S E L E C T E N T E R R E T R N
All items displayed will be returned
to their factory default settings,
"STD" will be displayed in the top-
right screen and the bar scale will
appear white.
NOTE:
B You can also select
STANDARD from the menu
screen and then press the
ENTER button.
Unavailable on-screen
menu items
This projector has unadjustable
items and unusable functions
depending on the signal being
input.
When an item cannot be adjusted
or a function cannot be used, the
corresponding on-screen menu
display does not appear, and the
item or function will not work even
if the ENTER button is pressed.
B When an individual adjustment
screen is being displayed
B R I G H T 3 2
Only the item displayed will be
returned to the factory default
setting, and the bar scale will
appear white.
NOTE:
B Triangle symbols above and below
a menu bar indicate the factory
default setting. Items which do not
have these triangle symbols
cannot be returned to the factory
default setting.
Indicates the standard factory
default setting
Indicates the current
adjustment value
B The positions of triangle
symbols vary depending on the
type of signal being input.
E -33
NGLISH