Romina 315 TF Assembly Instructions Manual

Download this manual

ASSEMBLY INSTRUCTIONS

FOR 315 TF & 315 TT BELLAIR BUNK BEDS

NOTE: THE STYLE OF

YOUR BEDS OR OF YOUR

GUARDRAILS MAY VARY

Furniture

FROM WHAT IS PICTURED

IN THE INSTRUCTION

20 Corporation Row, Edison, NJ 088 7

S H E E T .

U N D E R

Phone

(718) 478 5100, Fax (718) 478 5117

BED TRUNDLE IS SOLD

www.rominafurniture.com

SEPARATELY.

Need help?

Do you have a question about the 315 TF and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTIONS FOR 315 TF & 315 TT BELLAIR BUNK BEDS NOTE: THE STYLE OF YOUR BEDS OR OF YOUR GUARDRAILS MAY VARY Furniture FROM WHAT IS PICTURED IN THE INSTRUCTION 20 Corporation Row, Edison, NJ 088 7 S H E E T .
Page 2 COMPONENTS ARE IN THEIR PROPER POSITION, FREE FROM DAMAGE, AND THAT ALL CONNECTIONS ARE TIGHT. § DO NOT SUBSTITUTE PARTS. PLEASE, CONTACT ROMINA FURNITURE DEALERS FOR REPLACEMENT PARTS. § THE USE OF A NIGHT-LIGHT MAY PROVIDE ADDED SAFETY PRECAUTION FOR A CHILD USING THE UPPER BUNK.
Page 3 Please locate and confirm you have the following parts: A. larger end panels = 2 B. smaller end panels = 2 C. long bed rails = 4 D. group of 7 support slats assembled with 2 textile ribbons = 4 E.
Page 4 STEP 4 Place the steel pins ( ) in the holes provided in the top of each larger end panel. Stack the smaller end panels on the top of larger end panels by inserting the pins into the holes on the bottom of the smaller end panel (use hammer if required).
Page 5 STEP 7 Assemble the ladder stairs with ladder rails using the shorter Allen bolts ( ) and Allen wrench ( ). The rounded side of the ladder stair must be outside. Fasten the two ladder hooks ( ) to the ladder using wood screws ( ).

315 tt