Page 1
ASSEMBLY INSTRUCTIONS FOR ANTONIO & CLEOPATRA TWIN SIZE BEDS 7515 6515 IMPORTANT: PLEASE, READ ALL INSTRUCTIONS BEFORE ASSEMBLING! PLEASE, SAVE INSTRUCTIONS FOR FUTURE USE. THE STYLE OF YOUR BED / RAILS / ACCESSORIES MAY VARY FROM WHAT IS PICTURED IN THE INSTRUCTION SHEET...
Page 2
Please, refer to this number in the event that you need to call Antonio & Cleopatra twin bed hardware kit: ROMINA FURNITURE or your local distributor. Thank you. 1. Allen bolt (100 mm - 4") 2.
Page 3
STEP 1 (for all ANTONIO & CLEOPATRA twin beds) Attach the the bed rails (BR) to the headboard (HB) using 4 bigger Allen bolts (1) and 4 barrel nuts (3). Make sure that the wood brackets attached to the bed rails faces towards the inside of the bed. please see the Align the straight slots in the head of the barrel nuts horizontally.
Page 4
STEP 3 (for all ANTONIO & CLEOPATRA twin beds) Using all eight smaller Allen bolts (2), all four cam studs (6) and all four cam locks (7) attach the wooden ornaments (WO) to the bed rails (BR) and to the end panels (HB) & (LPFB), following the next steps: A) using a Phillips screwdriver (not supplied) or just the hand insert a cam stud (6) in one crib’s foot (please see the...
Page 5
STEP 4 (for all ANTONIO & CLEOPATRA twin beds) Place the support slats (SL) onto the wood brackets attached to the bed rails. Position the support slats evenly between the bed ends. Make sure you firmly attach the support slats to the wood brackets using all eight wood screws (4).
Page 8
Regular cleaning with mild soap on a soft cloth, followed by a clean damp cloth, then a dry cloth, will preserve the original luster and beauty of the fine finish of your Romina Furniture product. Thank you for being one of our distinguished clients.
Need help?
Do you have a question about the 7515 and is the answer not in the manual?
Questions and answers