Advertisement
O1
Important!
When using the equipment, safety precautions
must be observed to avoid injuries and
damage.Please read the complete operating
instructions and safety regulations with due
care. Keep this manual in a safe place, so that
the information is available at all times. If you
give the equipment to any other person, hand
over these operating instructions and safety
regulations as well.
We cannot accept any liability for damage or
accidents which arise due to a failure to
follow these instructions and the safety
instructions.
1. Safety information
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety
regulations and instructions may result in an
electric shock, fire and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
Safety devices
When working with the blade the metal guard
hood must be installed and when working
with the cutting spool the plastic guard hood
must also be installed to prevent objects being
thrown out by the machine. The integrated
blade in the plastic guard hood automatically cuts
the line to the optimum length.
14
Helpline No. UK 0151 649 1500 / IRE 189 094 6244r
O2
2. Machine description and items
supplied (Fig. A – C)
1. Line Spool Assembly
2. Guard for blade with screws
3. Guard for cutting line with screws
4. Blade
5. Handle
6. Engine switch "ON/OFF" (1/0)
7. Throttle lever "release"
8. Throttle lever
9. Fastening eyelet
10. Choke (swivelling)
11. Starter cable
12. Spark plug boot
13. Air filter housing cover
14. Fuel tank
15. Housing for engine cooler and starter
16. Fuel pump "primer"
17. Carrying strap
18. Connecting piece for long handle
19. Long handle with drive shaft
20. Fuel mixture bottle
21. Spark plug wrench
22. 2-stroke oil
23. Locking bar
24. Allen Key (size 4mm)
25. Additional half-handle (LH)
26. Additional half-handle (RH)
27. LH Threaded nut
28. Drive Collar
29. Blade clamp collar
30. Cable clip
Advertisement
