Turning On The Power - Panasonic PT-LB20E Operating Instructions Manual

Turning on the power

Before turning on the power
1. Ensure that all peripheral
devices are connected
properly.
2. Remove the lens cover.
POWER
INPUT
VIDEO RGB
AUTO
MENU
SETUP
ENTER
FREEZE SHUTTER
STD
VOLUME D.ZOOM
INDEX
WINDOW
PROJECTOR
Connect the accessory mains lead to the AC IN
#
socket.
BThe POWER button on the projector will illuminate red.
Press the POWER button.
$
BThe POWER button on the projector will flash green. After a short
period, it will illuminate green, and a picture will be projected.
%
Turn on the power of all connected devices.
BStart the play function of a device such as a DVD player.
NOTE:
B If the mains lead was disconnected during projection when the projector
was used the last time, projection will start after the mains lead is
connected (when "POWER MEMORY" in the "OPTION" menu is set to
"ON"). Refer to page 48 for details.
B A tinkling sound may be heard when the lamp unit is turned on, but this
is not a sign of a malfunction.
24-E
NGLISH
$
&
(
POWER button
Lens cover
#
Mains lead
)
*
'