Computer Connection Guidance - Panasonic PT-F300E Operating Instructions Manual

Technical Information
Cable specifications
(When connected to a personal computer)
Projector
Control commands
Command Control contents
PON
POF
AVL
IIS
Q$S Lamp condition query
OSH

Computer connection guidance

You can switch the signals which to output from the COMPUTER1 OUT terminal by pressing the computer key
command. The key commands are depend on the manufactures. If you select the computer terminals which has no
signals while the INPUT GUIDE is set to DETAILED, the computer connection guidance will be displayed.
Manufacturer
Panasonic
NEC
FUJITSU
NOTE:
• The computer connection guidance will disappear after 5 minutes.
• Please refer the instructions which provided with the computers for more detailed information.
E
NGLISH - 56
NC
NC
NC
NC
In standby mode, all commands other than the PON command are ignored.
Power ON
The PON command is ignored during lamp ON control.
If a PON command is received while the cooling fan is operating after the lamp has
Power OFF switched off, the lamp is not turned back on again straight away in order to protect
the lamp.
Parameter
Volume
000 - 063 (Adjustment value 0 - 63)
Parameter:
VID = VIDEO
INPUT
RG1 = COMPUTER1
DVI = DVI
Call back
0 = Standby
1 = Lamp ON control active
Turning off the projection and sound temporarily.
AV MUTE Send the command to switch between ON and OFF.
Do not send the command consecutively.
Key command Manufacturer
TOSHIBA
SHARP
+
HP
EPSON
+
DELL
NC
NC
PC (DTE)
NC
NC
Remarks
SVD = S-VIDEO
RG2 = COMPUTER2
NWP = NETWORK
2 = Lamp ON
3 = Lamp OFF control active
Key command Manufacturer
IBM
SONY
+
Apple
Others
+
Key command
+
+