Remote Control - Panasonic PT-F300E Operating Instructions Manual

About Your Projector

Remote control

Attaching a hand strap
You can attach a
favourite strap on to the
remote control.
Power button
While the MAIN POWER is
on, switch between standby
mode and projection mode.
(page 23)
Project a laser pointer.
(page 30)
Display the main menu.
(page 34)
Navigate through the
menus with FGIH, and
activate the menu item
with the ENTER button.
(page 34)
Capture the projected image
as a frozen picture.
(page 29)
Reset some of the settings
to the factory default
settings. (page 29)
Assign the frequently use
functions from the options
for shortcut. (page 30)
Control to change the scale
by means of digital zoom.
(page 28)
These buttons are for network control. See the contents of the
provided CD-ROM for instructions. The COMPUTER
SEARCH button is for PT-F300NTE only.
NOTE:
• Do not drop the remote control.
• Avoid contact with liquids or moisture.
• Use manganese batteries or alkaline batteries with the remote control.
• Do not attempt to modify or disassemble the remote control. Contact an Authorised Service Centre for repairs.
• Do not keep pressing the remote control buttons as this may shorten battery life.
• Do not point the laser in other people's eyes or stare into beam.
• See "Remote control operation" on page 27.
E
NGLISH - 16
Top view
Remote control signal
emitters (page 27)
Laser pointer beam
emitter (page 30)
(Shown as PT-F300NTE)
Battery compartment
1. Press the tab and lift up the cover.
2. Insert the batteries according to the polarity diagram
indicated inside.
Remote control indicator
Pressing any button except the LASER
button, the remote control indicator will
flash. Pressing the LASER button, it will
lit.
Automatically adjust the
setting of SHIFT, DOT
CLOCK, CLOCK PHASE
and SIGNAL SEARCH for
the projected image of COMPUTER/
DVI signal. (page 27)
Switch the required input
signal button to select.
Return to the previous menu.
(page 34)
Turn off the projection
temporarily. (page 29)
Display the frozen image
while the display of
subsequent images
continues. (page 29)
Control to adjust the volume
of the speaker. (page 31)