Power Indicator - Panasonic PT-F300E Operating Instructions Manual

Switching the projector on/off

Power indicator

The power indicator informs you the status of the power.
When the LAMP or TEMP indicator is flashing, you cannot switch on the power. See "TEMP, LAMP and FILTER
Indicators" on page 49.
Indicator status
No illumination or flashing
RED
GREEN
ORANGE
NOTE:
• If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take
a while to start the projection.
• The electric consumption in standby mode is 4 W.
E
NGLISH - 24
Power indicator
The MAIN POWER is switched off.
The MAIN POWER is switched on and the projector is in standby mode.
Lit
When the LAMP or TEMP indicator is flashing, not available to switch on the power.
The power is switched off. (When NETWORK STANDBY in NETWORK menu or IN
Flashing STANDBY MODE of AUDIO SETTING in PROJECTOR SETUP menu is set to ON). Press
the power button to start the projection.
Flashing The power is switched on and the projector is getting ready to project.
Lit Projecting.
The power is switched off and the projector is cooling the lamp. The indicator will light or flash,
Lit
and start the projection after a short time.
Flashing The power is switched on again when cooling the lamp and recovering to projection mode.
Status