Table of Contents
Advertisement
Mounting the lens
1
Raise the lens clamp lever, and remove the mount cap.
Mount cap
2
Align the guide pin on the lens with the groove at the
top centre of the lens mount, and mount the lens.
Guide pin
3
Lower the lens clamp lever to clamp the lens in place.
Lens clamp lever
Groove
Lens clamp lever
4
Insert the cable into the cable clamp and connect it to
the lens connector.
Lens connector
Notes
For details on handling the lens, refer to the
instructions that accompany the lens.
Depending on the lens mounted, it may be necessary
to perform the following lens and camera adjustments.
1. Flange back adjustment for the lens
. Auto iris operation speed adjustment for the lens
. White shading adjustment for the lens (performed
using the controls on the camera)
1
Advertisement
Table of Contents
