Setting Up; Screen Size And Throw Distance - Panasonic PT-AX100E Operating Instructions Manual

Setting up

Screen size and throw distance

You can adjust the projection size with 2.0 power zoom lens. Calculate and define the throw distance as follows.
Diagonal length
(SD)
1.01 m (40")
1.27 m (50")
1.52 m (60")
1.77 m (70")
2.03 m (80")
2.28 m (90")
2.54 m (100")
3.05 m (120")
3.81 m (150")
5.08 m (200")
* All measurements above are approximate and may differ slightly from the actual measurements.
Calculation methods for screen dimensions
You can calculate more detailed screen dimensions from the screen diagonal.
* The results above are approximate and may differ slightly from the actual measurements.
NOTE:
Do not use the projector at a raised or a horizontally tilted position as it may
cause malfunction of the projector.
Make sure the projector lens surface is parallel with the screen. You can tilt
the projector body approximately ± 30 degrees vertically. Overtilting may
result in shortening the component's life.
For the best quality of the projection image, install a screen where sun light or
room light does not shine directly onto the screen. Close window shades or
curtains to block the lights.
14 - E
NGLISH
Screen
Projection size (16 : 9)
Screen height (SH)
0.50 m (1'7")
0.62 m (2')
0.75 m (2'5")
0.87 m (2'10")
1.00 m (3'3")
1.12 m (3'8")
1.24 m (4')
1.49 m (4'10")
1.87 m (6'1")
2.49 m (8'2")
SW = SD x 0.872
LW = 1.2244 x SD - 0.056
Minimum distance
Screen width (SW)
0.89 m (2'11") 1.2 m (3'11")
1.11 m (3'7") 1.5 m (4'11")
1.33 m (4'4") 1.8 m (5'10")
1.55 m (5'1") 2.1 m (6'10")
1.77 m (5'9") 2.4 m (7'10")
1.99 m (6'6") 2.7 m (8'10")
2.21 m (7'3") 3.1 m (10'2")
2.66 m (8'8") 3.7 m (12'1")
3.32 m (10'10") 4.6 m (15'1")
4.43 m (14'6") 6.2 m (20'4")
SH = SD x 0.490
LT = 2.4449 x SD - 0.056
Throw distance (L)
Maximum distance
(LW) (LT)
2.4 m (7'10")
3.0 m (9'10")
3.7 m (12'1")
4.3 m (14'1")
4.9 m
5.5 m
6.2 m (20'4")
7.4 m (24'3")
9.3 m (30'6")
12.4 m (40'8")
Unit: m
(16')
(18')