Wss; Over Scan; Keystone; Auto Setup - Panasonic PT-AX100E Operating Instructions Manual

Panasonic lcd projector operating instructions model no. pt-ax100e
Hide thumbs Also See for PT-AX100E:
Table of Contents

Advertisement

Aspect ratio depend on signals
Press I H to cycle through the aspect ratio
options. The cycle pattern depends on the
connected signals.
4:3 \ 16:9 \ 14:9 \ JUST \
ZOOM1 \ ZOOM2
VIDEO/
AUTO \ 4:3 \ 16:9 \ JUST \
S-VIDEO
ZOOM
NTSC signal
4:3 \ 16:9 \ V SCROLL
4:3 \ 16:9
VGA or SVGA signals
PC (RGB)
V SCROLL only
WIDE768
Not switchable
WIDE480/600/720/768-2 signals
4:3 \ 16:9
16:9 \ H - FIT \ V - FIT \ ZOOM
1 125 (1 080)/50i, 1 125 (1 080)/60i,
1 125 (1 080)/50p, 1 125 (1 080)/60p,
HDMI
1 125 (1 080)/24p, 750 (720)/50p and
750 (720)/60p signals
4:3 \ 16:9 \ JUST \ ZOOM
525p (480p) and 625p (576p) signals
4:3 \ 16:9 \ 14:9 \ JUST \
ZOOM1 \ ZOOM2
625i (576i), 625p (576p)
AUTO \ 4:3 \ 16:9 \ JUST \
ZOOM
YP
P
525i (480i), 525p (480p)
B
R
16:9 \ H - FIT \ V - FIT
1 125 (1 080)/50i, 1 125 (1 080)/60i,
1 125 (1 080)/50p, 1 125 (1 080)/60p,
1 125 (1 080)/24p, 750 (720)/50p,
750 (720)/60p signals

WSS

If a PAL/625p (576p)/625i (576i) signal is input and that
signal has an identification signal, the aspect ratio is
automatically switched to the required setting. You can
switch the system off manually.

OVER SCAN

If the 4 edges of an image is partly dropped, you can use
this function to adjust and project it properly.
Shrink
Setting range: 0 to +10
OVER SCAN is not available with PC signals.
If the projector is aligned non-perpendicularly to the
screen, or if the projection screen has an angled
surface, you can vertically correct keystone.
You can adjust V - POSITION, H - POSITION, DOT
CLOCK and CLOCK PHASE automatically when
connecting via PC. Press ENTER to adjust these at the
same time.
Enlarge
POSITION Menu

KEYSTONE

Image
Setting range: -32 to 32
NOTE:
You can correct the distortion ± 30 degrees from
the vertical plane. For a better quality image,
installing the projector with a minimum of
distortion is recommended.
Some distortion may be retained for Lens shift
adjustment.
The distortion of the Main menu screen is not
correctable.
The result of the keystone correction will affect on
the aspect ratio and the size of the image.

AUTO SETUP

Operation
E
- 33
NGLISH

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents