Advanced Menu - Panasonic PT-AE3000E Operating Instructions Manual

PICTURE menu
Adjusting the image in a split window
1. Select AREA SELECT and press the ENTER
button.
The image will be frozen and the area cursor will be
displayed.
MOVE AREA ENTER
2. Press I H to move the area cursor to select the
area of interest and press the ENTER button.
The selected frozen image will be displayed in a split
window.
3. Press the MENU to display the PICTURE menu on
the right.
4. Adjust the required PICTURE menu items.
Only the highlighted menu items are adjustable.
Sub-menu items vary according to the selected input
signal. See "Main menu and sub-menu" on page 30.
5. Press the MENU/RETURN button several times to
escape from the menu.
6. Press the ENTER button.
The confirmation screen will be displayed. Select OK
to finish the adjustment.
7. Press the ENTER button.
Press the ENTER button again to return to the AREA
SELECT.
Press the RETURN button to escape from the SPLIT
ADJUST mode.
E
34 - NGLISH
GO TO SPLIT ADJUST RETURN GO TO FREEZE SCREEN
PICTURE
PICTURE MODE
CONTRAST
POSITION
BRIGHTNESS
LANGUAGE
COLOUR
LENS CONTROL
TINT
SHARPNESS
FUNCTION BUTTON
COLOUR TEMPERATURE
OPTION
DYNAMIC IRIS
WAVEFORM MONITOR
SPLIT ADJUST
RETURN

ADVANCED MENU

MEMORY SAVE
SELECT ENTER
MEMORY LOAD
MEMORY EDIT
ADVANCED MENU
You can perform more detailed image adjustment
manually.
GAMMA
You can adjust linear intensity at 3 levels. Press
I H to increase/decrease 1 point.
Levels
GAMMA HIGH
GAMMA MID
GAMMA LOW
Setting range: -8 to +8
CONTRAST
You can adjust the amount of contrast of individual
RGB colours. Press I H to increase/decrease
1 point.
CONTRAST R
CONTRAST G
NORMAL
CONTRAST B
ON
Setting range: -32 to +32
OFF
BRIGHTNESS
You can adjust the brightness of individual RGB
colours. Press I H to increase/decrease 1 point.
BRIGHTNESS R
BRIGHTNESS G
BRIGHTNESS B
Setting range: -16 to +16
NR (Noise Reduction)
You can adjust the automatic noise reduction
system level. Press I H to change the level.
Setting range: 0 to +3
Default setting
RGB Default setting
RGB Default setting
0
0
0
0
0
0
0
0
0