Wss; Over Scan; Keystone; Auto Setup - Panasonic PT-AE3000E Operating Instructions Manual

WSS

WSS (Wide Screen Signalling) detects if a PAL/
625p (576p)/625i (576i) signal is input and that signal
has an identification signal, and switch the aspect ratio
to required setting automatically. You can switch the
system off manually.

OVER SCAN

If the 4 edges of an image is partly dropped, you can use
this function to adjust and project it properly.
Setting range: 0 to +10
OVER SCAN is not available with COMPUTER
signals.
Shrink

KEYSTONE

If the projector is aligned non-perpendicularly to the
screen, or if the projection screen has an angled surface,
you can correct the keystone vertically.
Enlarge
NOTE:

AUTO SETUP

You can adjust V - POSITION, H - POSITION, DOT
CLOCK and CLOCK PHASE automatically when
connecting via COMPUTER IN. Press ENTER to adjust
these at the same time.
Image
Setting range: -32 to 32
• You can correct the distortion ± 30 degrees from the
vertical plane. For a better quality image, installing the
projector with minimum distortion is recommended.
• Some distortion may be retained for the lens shift
adjustment.
• The distortion of the main menu screen is not
correctable.
• The result of the keystone correction will affect the
aspect ratio and the size of the image.
POSITION menu
Operation
E
NGLISH - 39