Panasonic PT-AE3000E Operating Instructions Manual page 17

Projector location range
You can determine where to locate the screen and the projector by considering the lens shift possibilities.
When the screen position is fixed
When the projector position is fixed
NOTE:
• When the projector is located at the right angle to the centre of the screen and the lens shift dials is centred, you will get
the best quality of the projection image.
• When the Lens shift dial • Vertical is at the vertical limit of the shift range, you cannot turn the dial to the horizontal limit,
likewise when the Lens shift dial • Horizontal is at the horizontal limit of the shift range, you cannot turn the dial to the
vertical limit.
• When the projector is tilted and you adjust KEYSTONE, the centre of the screen and the lens need to be realigned.
• Do not force the lens shift dials to turn as this may damage the projector. Turning the dials maximum limit is 4 or 5 times
from the default position.
Projector
V
Vertical centre of
screen
SH
Screen
SW
100%
100%
40%
H
Placement
Centre of lens
Shift range
40%
Projector
Setting up
E
NGLISH - 17