Chapter 5; Tl-5.5Ii Specifications - VTL TL5.5 Series II Signature Owner's Manual

C H A P T E R 5

TL-5.5II Specifications

Vacuum Tube Complement
Inputs
Outputs
Remote Control Functions
Gain
Output Impedance
Input Impedance
Frequency response + 0 - 1 dB
Maximum Output Voltage < 1%
THD
Channel Separation
Power Consumption
Weight and Dimensions
TL5.5 SERIES II Preamplifier Owner's Manual
VTL
2 x 12AU7, 4 x 12AT7 (line stage)
2 pair balanced/XLR or RCA single-ended
6 pairs single-ended/RCA
1 pair balanced out
1 pair single-ended RCA out
1 pair single-ended RCA buffered Record Out
Power
Source Select
Volume up/down
Mute, Fade
Balance Control, Phase Reverse
Normal Gain --11 dB single ended, 17dB balanced
Switchable to Low Gain – 6 dB SE,11 dB balanced
150 Ohms (Max 400 ohms at 10Hz)
35K Ohms
1 Hz - 200KHz +0 –1dB
30 Volts 10Hz – 200kHz, 1.75V into 600 ohms at
1%THD
> 100 dB @ 1KHz (>80 dB @ 20kHz)
60 Watts (Line Stage)
130 Watts (with Phono stage)
40 lbs (18.12 Kg) Fully packed in one box
Unpacked weight: 30 lbs (13.6 Kg)
Unit Dimensions: 17.5 x 17.5x 4.75 in
(44.45 x 43.18 x 12.06 cm)
49