Table of Contents
Advertisement
Setting the hob
This section informs you how to set the hotplates. The table
shows heat settings and cooking times for various meals.
Switching the hob on and off
The main switch is used to switch the hob on and off.
To switch on: touch the
#
display light above the main switch and the
up. The hob is ready for use.
To switch off: Touch the
#
the main switch and the displays go out. All hotplates are
switched off. The residual heat indicator remains on until the
hotplates have cooled down sufficiently.
Notes
The hob switches off automatically if all hotplates have been
■
switched off for more than 20 seconds.
The settings remain stored for 4 seconds after the hob has
■
been switched off. If you switch it on again during this time,
the hob will operate using the previously stored settings.
Setting a hotplate
Set the desired heat setting on the control panel.
Heat setting 1 = lowest setting
Heat setting 9 = highest setting
Every heat setting has an intermediate setting. This is identified
by a dot.
Table of cooking times
The following table provides some examples.
Cooking times and heat settings may vary depending on the
type of food, its weight and quality. Deviations are therefore
possible.
Melting
Chocolate coating
Butter, honey, gelatine
Heating and keeping warm
Stew (e.g. lentil stew)
Milk**
Heating sausages in water**
Defrosting and heating
Frozen spinach
Frozen goulash
Poaching, simmering
Dumplings
Fish
White sauces, e.g. béchamel sauce
Emulsified sauces, e.g. béarnaise sauce, hollandaise sauce
* Ongoing cooking without a lid
** Without lid
*** Turn frequently
6
symbol. A signal sounds. The
‹
indicators light
symbol until the display light above
Setting the heat setting
The hob must be switched on.
Touch the
¹
symbol to select the hotplate.
1.
lights up in the heat setting display,
‹
heat setting display.
Set the desired heat setting in the control panel.
2.
Changing the heat setting
Select the hotplate and set the desired heat setting in the
control panel.
Switching off the hotplate
Use the
symbol to select the hotplate. Set the control panel
¹
to 0. After about 10 seconds, the residual heat indicator
appears.
Notes
The last selected hotplate remains activated. You can set the
■
hotplate without selecting it again.
Hotplate temperature is regulated by the heat switching on
■
and off. The heat may also switch on and off at the highest
setting.
For bringing liquids to the boil, use heat setting 9.
Stir thick liquids occasionally.
Ongoing cooking
setting
1-1.
1-2
1-2
1.-2.
3-4
2.-3.
2.-3.
4.-5.*
4-5*
1-2
3-4
lights up under the
¬
Ongoing cooking
time in minutes
-
-
-
-
-
10-20 min
20-30 min
20-30 min
10-15 min
3-6 min
8-12 min
Advertisement
Table of Contents
