Table of Contents
Advertisement
Childproof lock
You can use the childproof lock to prevent children from
switching on the hotplates.
Switching the childproof lock on and off
The hob must be switched off.
To switch on: touch the
‚
The display light above the
10 seconds. The hob is locked.
Automatic time limit
If a hotplate has been switched on for a long time without the
setting being changed, the automatic time limit is activated.
The hotplate stops heating.
indicator flash alternately on the hotplate display.
Wipe protection
If you wipe over the control panel while the hob is switched on,
settings may be altered.
To prevent this from happening, your hob has a control panel
pause function. Touch the
display light above the
‚
Basic settings
Your appliance has various basic settings. You can adapt these
settings to suit your own needs.
Display
Function
Automatic childproof lock
™‚
Switched off.*
‹
‚
Switched on.
Audible signal
™ƒ
Confirmation signal and incorrect operation signal switched off (main switch signal always remains on).
‹
Only incorrect operation signal switched on.
‚
Only confirmation signal switched on.
ƒ
Confirmation signal and incorrect operation signal switched on.*
„
™ˆ
Activation of the filament circuits
‹
Switched off.
Switched on.
‚
Last setting before the hotplate switched off.*
ƒ
™Š
Time for selecting the hotplate
‹
Unlimited: The last selected hotplate can always be adjusted without having to select it again.*
Once you select a hotplate, you have 10 seconds to adjust it, after which you will have to select it again in order to
‚
be able to adjust it.
*Basic setting
/
symbol for approx. 4 seconds.
$
‚
/
$
symbol lights up for
and the
/
residual heat
" ‰
•
œ
/
symbol. A signal sounds. The
‚
$
/
lights up. The control panel is
$
To switch off: touch the
‚
The lock is released.
Automatic childproof lock
This function automatically activates the childproof lock every
time you switch the hob off.
Switching on and off
You can find out how to switch the automatic childproof lock on
and off in the Basic settings section.
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
locked for 30 seconds. You can now wipe over the control
panel without altering any settings.
Note: The main switch is excluded from the control panel
pause function. You can switch off the hob at any time.
/
$
symbol for approx. 4 seconds.
9
Advertisement
Table of Contents
