Adjusting the Packing Seal Assembly
i
There is a hole in the cap (1). If coating medium is discharged
from this hole, the packing requires adjustment
1. Unscrew the cap (1) with the spray gun wrench (2), then remove the
spring (3).
2. Use box spanner 10 mm (4) to turn the pressure plate a quarter turn to
the right.
3. Replace the spring (3) and tighten the cap (1) as far as the stop.
If the problem persists, please consult your WAGNER service center.
AG 19
GB
4
3
2
1
25