Pre-Ride Checklist - Razor HOVERTRAX 2.0 Owner's Manual

Hide thumbs Also See for HOVERTRAX 2.0:
Table of Contents

Advertisement

SAFETY WARNINGS
Never use headphones or a cell phone when riding. Never hitch a ride with
another product.
Do not ride the Razor Hovertrax 2.0 in wet or icy weather and never immerse
this electric product in water, as the electrical and drive components could get
damaged by water or possibly create other unsafe conditions.
Wet, slick, bumpy, uneven or rough surfaces may increase risks. Do not
ride this electric product in mud, ice, puddles or water. Avoid excessive
speeds that can be associated with downhill rides. Never use near steps or
swimming pools.
Do not ride at night or when visibility is limited.
Be careful and know your limitations. Risk of injury increases as the degree
of riding difficulty increases. The rider assumes all risk associated with
aggressive riding activities.
WARNING: Never operate any moving product, including the Razor
Hovertrax 2.0, while under the influence of drugs or alcohol.
PROPER RIDING ATTIRE
Always wear proper protective equipment, such as an approved safety
helmet (with chin strap securely buckled). A helmet may be legally required
by local law or regulation in your area. Elbow pads, kneepads, wrist guards,
a long-sleeved shirt, long pants and gloves are recommended. Always
wear athletic shoes (lace-up shoes with rubber soles) and keep shoelaces
tied and out of the way of the wheels, motor and drive system. Never ride
barefooted or in sandals.
FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS INCREASES RISK OF SERIOUS INJURY.

PRE-RIDE CHECKLIST

Wheels
Practice riding only in wide open areas clear from curbs, parking
blocks and other obstacles, including things you may fall on or
into if you lose your balance. Impacting the wheels against any
hard surface can damage the wheels. Wheels are not covered
under your limited warranty.
Hardware/Loose Parts
Before every ride, check all parts, such as nuts, bolts, fasteners,
etc., to ensure they are secure and assembled correctly. There
should not be any unusual rattles or sounds from loose parts
or broken components. If the product is damaged, do not ride.
Reference "Safety Warnings" on pages 2 and 3 of
this manual.
Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
USE WITH APPROPRIATE CAUTION AND SERIOUS ATTENTION TO SAFE OPERATION.
USING THE CHARGER
The charger supplied with the electric product should be regularly examined
for damage to the cord, plug, enclosure and other parts. In the event of such
damage, the product must not be charged until the charger has been repaired
or replaced.
Use only with the recommended charger.
Use caution when charging.
The charger is not a toy. Charger should be operated by an adult.
Do not operate charger near flammable materials.
Unplug charger and disconnect from product when not in use.
Always disconnect from the charger prior to wiping down and cleaning your
product with damp cloth.
Safety Gear
Always wear proper protective gear, such as an approved safety
helmet. Elbow pads, kneepads and wrist guards are recommended.
Always wear athletic shoes (lace-up shoes with rubber soles) and
keep shoelaces tied and out of the way of the wheels, motor and
drive system. NEVER RIDE BAREFOOTED OR IN SANDALS.
Laws and Regulations
Always check and obey any local laws or regulations.
Storage
Store indoors when not in use.
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hovertrax dlx 2.0Hovertrax 2.0

Table of Contents