Tips On Saving Energy - Siemens te501 series Instruction Manual

en
Cleaning the brewing unit
Clean the brewing unit regularly�
To pre-clean the brewing unit automatically:
Press the service button (12) briefly. The
appliance will rinse if coffee was dispensed
previously� It then switches off�
In addition to the automatic cleaning
programme, the brewing unit (5a) should be
removed regularly for cleaning (Figure E at
the beginning of the instructions)�
1� Press the power on/off switch O / I (9) to
switch off the appliance� All lights go off�
2� Open the door (5b) to the brewing unit�
3� Slide the red lock (5d) on the brewing
unit (5a) completely to the left�
4� Press the eject lever (5c) down fully�
The brewing unit is released�
5� Grasp the brewing unit (5a) by the
recessed grips and remove carefully�
6� Remove the cover (5e) of the brewing
unit and rinse the brewing unit (5a)
thoroughly under running water�
14
7� Thoroughly clean the brewing unit sieve
under the running water�
Important: Do not clean with detergent or
other cleaning agents and do not put it in
the dishwasher�
8� Wipe out the inside of the appliance
thoroughly with a damp cloth and
remove any coffee residues�
9� Allow the brewing unit (5a) and the
interior of the appliance to dry�
10� Replace the cover (5e) on the brewing
unit and reinsert the brewing unit (5a)
fully into the appliance�
11� Press the eject lever (5c) up fully�
12� Slide the red lock (5d) fully to the right
and close the door (5b)�

Tips on saving energy

● Switch off the fully automatic espresso
machine when not in use� To do this,
press the service button (12)� The
appliance rinses and switches off�
● If possible, do not interrupt coffee
or milk froth dispensing� Stopping a
process prematurely results in higher
energy consumption and the drip tray
fills up more quickly.
● Descale the appliance regularly
to avoid a build-up of limescale�
Limescale residue results in higher
energy consumption�