Motor Installation - Oxy Heli Oxy 3 Instruction Manual

Motor Installation. (Box 02 / Bag 8)
Keep the motor wires
pointing forward, and
slip them down behind
the battery tray when
you install the motor.
3 x TCEM3X8
Hex Cap Screw
M3X8
Page 14
Chapter 9, Motor Installation
SCM3X3
Set Screw M3X3
Pinion Installation note:
Oxy 3 Slant Pinion
Be sure the set screw for
(11T – 14T Standard)
the pinion tightens down
See page 15 - Table for
on the 'flat' on the motor
best pinion choice.
shaft.